? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. document 218-1 revised 02/09/05 chip inductors - 0603hc series (1608) document 218-1 with their high current ratings and ultra-small size, these chip inductors are ideal for today?s high frequency, low voltage applications like mobile phones. they feature continuous current ratings up to 2.4 amps dc and will handle transient currents up to 50% higher. at low inductance values, their q factors are also higher than our standard 0603cs series. coilcraft designer?s kit c139 contains samples of all 5% in- ductance tolerance parts. to order, contact coilcraft or visit http://order.coilcraft.com . srf dcr inductance 2 percent q 900 mhz 1.7 ghz min 5 max 6 i rms 7 color part number 1 (nh) tolerance 3 min 4 l typ q typ l typ q typ (mhz) (ohms) (a) code 0603hc-1n6x_b_ 1.6 5 24 1.67 49 1.65 63 12500 0.030 2.4 black 0603hc-3n6x_b_ 3.6 5 24 3.65 70 3.75 90 5900 0.048 2.3 brown 0603hc-3n9x_b_ 3.9 5 25 3.74 70 3.90 90 5900 0.054 2.2 red 0603hc-6n8x_b_ 6.8 5 35 6.72 70 7.10 75 5800 0.054 2.1 orange 0603hc-7n5x_b_ 7.5 5 38 7.33 70 7.90 68 3700 0.059 2.1 yellow 0603hc-10nx_b_ 10 5,2 38 9.70 73 10.5 57 3700 0.071 2.0 green 0603hc-12nx_b_ 12 5,2 38 12.3 68 14.5 41 3000 0.075 2.0 blue 0603hc-15nx_b_ 15 5,2 38 15.5 65 17.6 40 2800 0.080 1.9 violet 0603hc-18nx_b_ 18 5,2 40 19.5 62 25.0 40 2800 0.099 1.9 gray 0603hc-22nx_b_ 22 5,2 42 24.0 61 31.5 26 2400 0.099 1.8 white 0603hc-24nx_b_ 24 5,2 42 25.8 55 35.0 21 2400 0.105 1.8 black high current 2. inductance measured at 250 mhz using coilcraft smd-a fixture in agilent/hp 4286 impedance analyzer with coilcraft-provided correlation pieces. for recommended test procedures, contact coilcraft. 3. tolerances in bold are stocked for immediate shipment. 4. q measured at 250 mhz using agilent/hp 4291a with agilent/ hp 16193 test fixture. 5. srf measured using agilent/hp 8720d network analyzer and coilcraft smd-d test fixture. 6. dcr measured on micro-ohmmeter and coilcraft ccf858 test fixture. 7. average current for a 20c rise above 25c ambient. 8. operating temperature range -40c to +125c. 9. electrical specifications at 25c. see qualification standards section for environmental and test data. 1. when ordering, please specify tolerance and packaging codes: 0603hc-24nx j b w tolerance: g =2% j = 5% (table shows stock tolerances in bold.) packaging: w =7 machine-ready reel. eia-481 punched paper tape (2000 parts per full reel). u = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter w instead.
? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. 0603hc (1608) chip inductors document 218-2 revised 12/28/04 document 218-2 typical l vs frequency high current a b overall c d terminal wraparound: approx 0.007/0,18 both ends i i j f f g h recommended land pattern e terminal a max b max c max d ref e f g h i j 0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 1,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0,64 weight: 3.3 ? 3.7 mg terminations: silver-palladium-platinum tape and reel: 2000/7 reel 8 mm tape width for packaging data see tape and reel specifications section. 100 90 80 70 60 50 40 30 20 10 0 1 10 100 1000 10000 frequency (mhz) q factor 5.6 nh 3.6 nh 6.8 nh 15 nh 22 nh 0 10 20 30 1 10 100 1000 10000 frequency (mhz) inductance (nh) 3.6 nh 6.8 nh 15 nh 22 nh typical q vs frequency
|
